Posts Tagged ‘ifttt’

 

A couple of years ago, I reviewed one of the first generation of smart thermostats on the market in the UK. Long before Nest was available, the German made Tado was making significant inroads into our fledgling IoT marketplace.

Two years have now passed and Tado have released v2 incorporating an upgraded Smart Thermostat and an Extension kit for dual zone control. In my opinion this is sorely needed so I have big hopes that it works as well as intended.

Before continuing to review this upgrade, we need to look at a some statistics from the 2 years the 1st generation system has been in my property.

Straight energy saving comparisons between Tado v1 and the traditional method of heating that was pre-installed in my property (the legacy thermostat) are actually difficult to quantify for a number of reasons. We cannot compare money spent as we have fluctuations in energy prices which would cause us some calculation issues. Secondly, the weather. Of course this is being tested in Britain, weather changes all the time, so one year could have been considerably hotter or colder than the next so please keep this in consideration.

KW/h expressed in units are what are reported but for the purposes of this review I will refer to them only as units. I took an average of the three years prior to my time with Tado (with the same energy provider) and compared the result to the units used each of the two years with the device.

Here are my results;

Year 1: 21% less units used

Year 2: 26% less units used

As you can see, under my conditions, using Tado has saved a significant amount annually which would have easily paid for the price of the 1st Gen model in the first year.

The bottom line is that Tado deliver on their promise.

Now that’s out of the way, let’s move on to the new upgraded version.

smart_thermostat_hardwareTado with cool white LED display

I opted for a professional to install it for me, firstly as I did not want to mess around with my heating system but more importantly I wanted to see how Tado handle the entire upgrade.

As the equipment arrived with instructions on how to install, my first thought was that Tado had got a little mixed up as the instructions advised me to register the device before booking my installation which sounded a little odd as I already had a Tado system in the house.

But I should have had more faith in Tado because my new devices were registered and a professional installation were booked in an instant by following the instructions.

I will say that I think that Tado could improve on their communication with their upgrade  customers, specifically that the proper procedure is to register new devices first which will eventually allow you to book an engineer install further along in the process.

Each step felt like it was leading up to a manual setup which I did not want.

Secondly they could just advise the user that your old setup will run alongside the new one until the professional fits the devices which does become apparent at the end of the process.

But with all that said, Tado continue to impress me with not only the devices but the way they make setup so easy to follow. You may have a nagging feeling that the setup process will eventually lead you down the wrong path but if you stick with it, you will have no problems. Tado know what they’re doing and I could name a few tech companies who could take a lesson or two from these guys.

The only thing that seemed to cause the engineer some trouble was pairing each device.

I think this was more due to the engineer’s lack of knowledge rather than Tado’s design as one call to Tado themselves and it was fixed remotely in a matter of minutes.

If you can take anything from this review – call the Tado support team if you have any problems – the service really is second to none.

st_lifestyle_03

Anyway, back to the devices. The first generation Tado thermostat has been replaced with a similarly looking white plain thin box. When discussing the aesthetics with my wife, she hit the nail on the head when she said “the box just disappears into the wall, you wouldn’t even notice it day to day” and that is exactly what a thermostat should be. Clever but invisible.

But don’t be fooled by the boring exterior, one press of the front button and the device wakes to show the temperature set in a very cool white LED. Each press flips to a new display showing the current mode:

Heating Status (On or Off)

Temperature

Hot water setting (if you have configured the system for this)

The next two pages show the conditions. Two touch sensitive led little arrows allow you to change the settings on each page.

Tado has been set up in my property to control two zones and my hot water tank. I can control each zone independently from the device or my iPhone.

IMG_4281

Above is the photo of the first page showing the main temperature in that room and of course below the set point temperature which is where the heating will come on if the room temp drops to that level. You can see at the bottom the fact that Tado tracks where it’s users are, which in my opinion is the best thing about this system. It is simply brilliant that the system knows when I am just round the corner and may need the heating ready for when I get back as the room temp is below the set point temp, but equally if we are 20 miles away at work, the system knows not to do this as it will take at least an hour to get home.

Equally zone 2 also operates in the same manner and can be set independently from zone 1 which is downstairs for us. The system allows you to set times when the system will operate, so for example in zone 2 we only need it to work in the evening as we normally go up there to relax and watch TV. But because of the timing feature, if we were home during the day this zone would not be heated as it was outside of the time range we had set. This is all very versatile and will fit around any family household but again is all very easily over-ridden by going manual on the app or simply clicking the button on the thermostat which with a few finger presses lets you override.

ios_app

Tado are a very interesting company and have already signed up to Apple’s HomeKit. The eagle-eyed amongst you would have noticed the Tado logo in the HomeKit presentation in Apple’s WWDC earlier this week which means that not only are the company working with the whole HomeKit which will become available in Autumn 2016, but it should also allow the device to be able to work alongside the other brands that were also on screen in the pic below.

IMG_0579Apple HomeKit Brands

Imagine what this means for a moment, if Tado get this right you will be able to have the device interact with brands that are nothing to do with Tado themselves. For example temperature spikes as it is in Manual Mode in error – flash my Philips Hue lights red to notify me. Or even better, use Tado’s geo-fencing properties to know when I am coming home to ensure heating is on (Tado), lights downstairs are on and ready (Philips Hue) and the garage door is now open (Fibaro Z-Wave Sensors). This will be subject to the Extension Kit being upgraded by Tado as I have been informed this will not be a simple software upgrade as the Extension Kit came out before Apple’s certification process.

On top of this Tado support have told me that the devices themselves also have some unused sensors inside which they may use at some point in the future. This intrigues me as it shows they are future proofing themselves. They have also now signed up to IFTTT, the popular website which again connects devices.

We are looking forward to testing the individual radiator controls as this is the logical next step to total heating management in the modern home allowing you to control individual radiator temperatures per room, but these are due Q3 2016.

To conclude, Tado is a no-brainer for me, if you haven’t got one, then start looking into it as it should quite rapidly save you money in an area which seems to be getting more and more expensive.

The system is solid, with even more solid support to go with it. It will fade into your wall as you forget it is even there and I think this is exactly what it is designed to do.

 

TheTechSpy Rating: 10/10

 

There is only one thing that TheTechSpy team need in the morning to get them going and that is a good cup of coffee.

Whether it’s a cappuccino, flat white or even a swift espresso, most of us feel better with that little hit of caffeine to get the old grey matter sparking.

So you can imagine, when one of coffee’s giants Nespresso announced the release of a new coffee machine which now includes a little smartphone connectivity, we were more than interested.

Nespresso Prodigio is one of a handful of connected home coffee machines that we have  seen….and my is it a beauty.

MACHINE-PRODIGIO-NESPRESSO-TITAN_300dpi-582x437

Nespresso have always been an elegantly styled company and this machine is totally in line with their brand. I couldn’t see this machine out of place in any home and the fact it is a small form factor helps as it would be perfect for an apartment.

Now, the techie side….this machine is not yet connected to the internet of things, but that’s not to say that they will not do this in the future. It all works through a Bluetooth connected app which allows you to see water level, when the machine needs descaling and also when you need to buy more capsules (which you can order through the same app). All these notifications will be useful to any person using this on a daily basis.

But what we really wanted to see was some sort of remote use, which when you think about is a little pointless as at present my ordinary bog standard Nespresso machine only has one button to press after putting a pod in and turning it on. But if we looked at all tech like this, I think we would see a lot of devices would not even exist under this premise.

The app allows you to remotely make a cup of coffee at 3 set sizes, which potentially has some good use. If I am honest, after a week of waking up at 5.15am I would probably be fed up with opening an app and making a coffee like this, but where it would get interesting is if Nespresso worked with IFTTT which would allow you to set a chain of actions, for example when my alarm goes off start brewing my espresso or when I get in from work start making a coffee.

I think this machine is cool, but it represents the advancement of technology in a sector that normally would not be associated with this. That is the important thing here, that companies like Nespresso are realising that this is needed. The firm’s managing director Francisco Noguiera said that the machine is to “showcase the latest coffee technology” and to “listen to the consumer need for greater convenience and personalisation of products” which in my opinion although true, this machine is a little half hearted in that sense.

The device in its current state is merely a talking point when friends come around, but if we set aside the actual tech it is a beautiful looking machine albeit a little overpriced at £200+.

Would I go out and buy this? No, for the first time in a long time I think I will stick with my existing unconnected Nespresso machine which merely asks me to turn it on and then make a choice of 4 buttons as to which coffee I want.

Once again, we look forward to the future of this booming sector.

TheTechSpy